Replaceable Aluminum Derailleur Hanger.

142 / 148 Models: The HD, HD-R, SL-R, HD3/4/5, DV9, Ripley and Ripley LS, Mojo 3 and Ripmo & Ripmo AF all use the same hanger.

NOTES:

The earlier Mojo HD with 135mm rear wheel spacing uses a different mount.

The Mojo SL hanger works on the Ibis Mojo, Mojo SL, and Tranny 26.

The hanger designed for the New Mojo 3 and Ripley/ Ripley LS will fit all previous 142 models. It does not require the backing nut of the two-piece fixing bolt assembly as the new hanger has threads built in for the standard chainring bolt used.

NZ delivery only.

If you want to mount a chain guide on your Ibis, you will need one of these.

When using SRAM DUB cranks along with the ISCG plate on a RipMo or any frame with a 73mm bottom bracket shell width, you will need the SRAM DUB 2mm spacer inside the drive side crank arm against the bottom bracket shell.

It's aluminum. ISCG 05 standard

NZ delivery only.

6061-T6 aluminum axle with hard ano finish. Available for SRAM or Shimano (142 and BOOST); pick which one you need from the drop down.

Weighs 40g

Use the SRAM version for the following 142 x 12mm Ibis models:

• Mojo HD3 with 142mm rear

• First Generation Ripley (Blue or Black/Green)

• Mojo HDR

• Mojo HDR 650b

• Tranny 29

• Mojo SL-R

• Mojo HD with 142 x 12 rear axle

Use the Shimano 142 version for:

• V2 Ripley (Orange or Black)

• V2 Ripley LS

• Hakka MX

Use the 148 Boost (Shimano standard) version for:

• Ripley 4, V3, V2 with 148 Boost Swingarm

• DV9

• Mojo 3

• Mojo 4

• Mojo HD3 with 148 Boost Swingarm

• Mojo HD4

• Mojo HD5

• RipMo

• RipMo AF

• Ripley AF

• NOTE: There is not a numerical torque figure for the Hexle. We recommend tightening the 5mm with your multi tool that you carry with you. This way you’ll be able to remove it in case of a flat out on a ride.

  ANOTHER NOTE: If you are looking to retrofit your non-Ibis bike with one of our Hexle's, you'll need to know the standard or thread pitch. For some reason, our industry has decided we need three different thread pitches for through axles:

  • Syntace, Specialized and DT use 12x1.0

  • Shimano is 12x1.5

  • Rock shox maxle is 12x1.75

  Your bike manufacturer should be able to tell you which of these you need.

  For reference here are the shaft lengths of all three options:

• SRAM 142: 175mm

• Shimano 142: 165mm

• Shimano 148 Boost: 171mm

NZ delivery only.

COMPATIBLE WITH

• Ripmo AF

• Ripmo 1 - 2

• Ripmo V2 S

Forged Aluminum
CNC machined
Anodized finish
Includes bearings & 4 mounting bolts.

NZ delivery only.

This is the kit to replace your lower links for any of current Ibis model that use this style link.

• Ripmo 1, 2, V2S & AF

• Ripley 4, V4 S & AF

• HD5

All the hardware and replacement bushings / o-rings are included.

NZ delivery only.

4 mounting bolt kit for upper links.

Compatible With

• Ripmo AF

• Ripmo 1 - 2

• Ripmo V2S

• HD5

• HD4

• HD3

This is the protection piece for carbon frames that have the upper link attachment point behind the seat tube. If you need to replace it or add one, it's as easy as peeling off the backing, cleaning the area on your frame, and applying it to the best fit you can. It may be easier to remove the upper link to allow for more working room.

NZ delivery only.

Seattube rubber protector (50A durometer - soft and supple like your Minions.. ) to stick onto the swing arm of your Carbon Ripmo or Ripley V4 frame to guard against rock deflection onto the lower link.

Use this link for the instruction manual for installation

Fitment is for carbon Ripmo and Ripley V4 frames only. DOES NOT fit any of the Mojo HD's or Mojo 3, earlier Ripleys or the Ripmo/Ripley AF.

Compatible With

• Ripmo V1 

• Ripmo V2

• Ripley V4

Polycarbonate
Protects Downtube from Rock Strikes
Lightweight

Mounts via 2 Under Downtube Bolts on the carbon Ripmo and Ripley V4 frames. Bolts do not come with guard as they should be affixed to your bike frame. If you need a spare bolt let us know.

NOTE: This does NOT work on the Ripmo AF.

Available in black and, well, black

NZ delivery only.

This is the bushing kit for the clevis to swingarm bushings on the carbon V1 & V2 Ripmo. After an extended period of use, you might want to check these bushings for wear.

Full Kit with Bolts includes:
2 x clevis bolt and tear drop nut set
2x Igus Bushings
4x Reducer hardware (2x outer; 2x inner)
4x O-rings (1.2 x 17 mm)

Kit without Bolts includes:
2x Igus Bushings
4x Reducer hardware (2x outer; 2x inner)
4x O-rings (1.2 x 17 mm)

*Please note this kit is not compatible with the RipMo AF*
NZ delivery only.

This is for the Lower / Rear eyelet that connects to the clevis.

15mm wide with an 8mm bore

Fits following models:

• Alloy Frames

• Exie

• HD6, HD5, HD4

• Mojo 3, Mojo 4

• Ripley 4

• Ripley V4S

• Ripley V5

• Ripmo 1-2

• Ripmo V2S

• Ripmo V3

Included in the 4 piece kit is an eyelet bushing, black-ano rod, and two plastic spacers.

NZ delivery only.

Compatible With

• Mojo HD4 - 5

• Ripley 4

• Ripley V4S

• Ripmo 1 - 2

• Ripmo V2S

• Ripmo AF

This is the kit to replace the forward and rear shock mounting bolts. Contains

1 x  Forward Aluminum bolt

1 x  Rear Titanium bol

NZ delivery only.

Here's the necessary parts to refresh your lower link system.

4x link shaft bushings

4x 20mm o-rings

COMPATIBLE WITH

Ripmo 1 - 2

Ripmo AF

Ripley 4

Ripley AF

Mojo HD5

NZ delivery only.