Replaceable Aluminum Derailleur Hanger.

142 / 148 Models: The HD, HD-R, SL-R, HD3/4/5, DV9, Ripley and Ripley LS, Mojo 3 and Ripmo & Ripmo AF all use the same hanger.

NOTES:

The earlier Mojo HD with 135mm rear wheel spacing uses a different mount.

The Mojo SL hanger works on the Ibis Mojo, Mojo SL, and Tranny 26.

The hanger designed for the New Mojo 3 and Ripley/ Ripley LS will fit all previous 142 models. It does not require the backing nut of the two-piece fixing bolt assembly as the new hanger has threads built in for the standard chainring bolt used.

NZ delivery only.

Compatible With

• Ripley 1

• Ripley 2

• Ripley 3

Includes Enduro "MAX" black oxide bearings.

2 - 608 (swingarm, lower)
2 - 698 (swingarm, upper)
4 - 6806 (front triangle eccentrics)

The Ripley uses only 8 total bearings per frame. What Does 'MAX" Mean? Read about Enduro bearings here: http://www.enduroforkseals.com/id172.html

NZ delivery only.

This GnarCore eccentric pack is the replacement for the lower/upper eccentric cores on the Ibis Ripley V1 or V2 LS.

All hardware is included to refresh both the top and bottom cores (2 eccentric links in pack). We recommend new bearings when performing maintenance on these.

NZ delivery only.

Mojo 3/ Ripley V2 Clevis Bushing Service Kit
Parts kit for Ripley & Mojo3 Clevis to Swing Arm w/ bolts

NZ delivery only.

This is the bushing kit for the clevis to swingarm bushings on the Ripley V1. After an extended period of use, you might want to check these bushings for wear.

2x Igus Bushings

4x Reducer hardware

4x O-rings 14x1

2x M6x180 bolts

Ripley Rockguard
Polycarbonate
Protects Downtube from Rock Strikes
Lightweight
Mounts via 2 Under Downtube Bolts on Ripley 1, 2 LS & 3
Available in black and, well, black

NZ delivery only.

Replacement eyelet hardware from Fox.

This kit will allow you to refresh an existing shock or an aftermarket shock that doesn't come with the correct hardware to match the specs of our current models.

Fox part numbers for reference: Front 21.8mm wide: 803-03-165

Fits following models:

• Mojo 3

• HD4

• HD5

• Ripley 1 & 2

NZ delivery only.

This is the kit to replace the forward and rear shock mounting bolts.

1 x  Forward ti pin with stainless steel bolts

1 x  Rear Clevis to Shock bolt / nut

NZ delivery only.

Compatible with

Ripley 1 & 2 LS