MOJO 3 - PARTS
Replaceable Aluminum Derailleur Hanger.
142 / 148 Models: The HD, HD-R, SL-R, HD3/4/5, DV9, Ripley and Ripley LS, Mojo 3 and Ripmo & Ripmo AF all use the same hanger.
NOTES:
The earlier Mojo HD with 135mm rear wheel spacing uses a different mount.
The Mojo SL hanger works on the Ibis Mojo, Mojo SL, and Tranny 26.
The hanger designed for the New Mojo 3 and Ripley/ Ripley LS will fit all previous 142 models. It does not require the backing nut of the two-piece fixing bolt assembly as the new hanger has threads built in for the standard chainring bolt used.
NZ delivery only.
Ibis Mojo 3 Upper Link Assembly
Forged Aluminum
CNC machined
Anodized finish
Includes bearings & 4 mounting bolts
Super easy to replace
No special tools needed
NZ delivery only.
Mojo 3/ Ripley V2 Clevis Bushing Service Kit
Parts kit for Ripley & Mojo3 Clevis to Swing Arm w/ bolts
NZ delivery only.
This is for the Lower / Rear eyelet that connects to the clevis.
15mm wide with an 8mm bore
Fits following models:
Alloy Frames
Exie
HD6, HD5, HD4
Mojo 3, Mojo 4
Ripley 4
Ripley V4S
Ripley V5
Ripmo 1-2
Ripmo V2S
Ripmo V3
Included in the 4 piece kit is an eyelet bushing, black-ano rod, and two plastic spacers.
NZ delivery only.
Replacement eyelet hardware from Fox.
This kit will allow you to refresh an existing shock or an aftermarket shock that doesn't come with the correct hardware to match the specs of our current models.
Fox part numbers for reference: Front 21.8mm wide: 803-03-165
Fits following models:
Mojo 3
HD4
HD5
Ripley 1 & 2
NZ delivery only.
This is the set to install a lower link to a Mojo 3 or HD3 with boost 148 swingarm.
2 link shafts and 2 fixing bolts.
Torque to 24nm, Loctite 243 recommended.
NZ delivery only.
Compatible With
Mojo 3
Mojo HD3
Mojo HD4
Polycarbonate
Protects Cables and Downtube from Rock Strikes
Lightweight
Mounts via 2 Under Downtube Bolts on Mojo HD3 or Mojo3 SM/MD frame, 4 bolts on LG/XL size frame. Bolts do not come with guard as they should be affixed to your bike frame.
Available in 2 sizes
NZ delivery only.
If you want to mount a chain guide on your Ibis, you will need one of these.
When using SRAM DUB cranks along with the ISCG plate on a RipMo or any frame with a 73mm bottom bracket shell width, you will need the SRAM DUB 2mm spacer inside the drive side crank arm against the bottom bracket shell.
It's aluminum. ISCG 05 standard
NZ delivery only.