HD4 & HD3 - PARTS
Replaceable Aluminum Derailleur Hanger.
142 / 148 Models: The HD, HD-R, SL-R, HD3/4/5, DV9, Ripley and Ripley LS, Mojo 3 and Ripmo & Ripmo AF all use the same hanger.
NOTES:
The earlier Mojo HD with 135mm rear wheel spacing uses a different mount.
The Mojo SL hanger works on the Ibis Mojo, Mojo SL, and Tranny 26.
The hanger designed for the New Mojo 3 and Ripley/ Ripley LS will fit all previous 142 models. It does not require the backing nut of the two-piece fixing bolt assembly as the new hanger has threads built in for the standard chainring bolt used.
NZ delivery only.
6061-T6 aluminum axle with hard ano finish. Available for SRAM or Shimano (142 and BOOST); pick which one you need from the drop down.
Weighs 40g
Use the SRAM version for the following 142 x 12mm Ibis models:
Mojo HD3 with 142mm rear
First Generation Ripley (Blue or Black/Green)
Mojo HDR
Mojo HDR 650b
Tranny 29
Mojo SL-R
Mojo HD with 142 x 12 rear axle
Use the Shimano 142 version for:
V2 Ripley (Orange or Black)
V2 Ripley LS
Hakka MX
Use the 148 Boost (Shimano standard) version for:
Ripley 4, V3, V2 with 148 Boost Swingarm
DV9
Mojo 3
Mojo 4
Mojo HD3 with 148 Boost Swingarm
Mojo HD4
Mojo HD5
RipMo
RipMo AF
Ripley AF
NOTE: There is not a numerical torque figure for the Hexle. We recommend tightening the 5mm with your multi tool that you carry with you. This way you’ll be able to remove it in case of a flat out on a ride.
ANOTHER NOTE: If you are looking to retrofit your non-Ibis bike with one of our Hexle's, you'll need to know the standard or thread pitch. For some reason, our industry has decided we need three different thread pitches for through axles:
Syntace, Specialized and DT use 12x1.0
Shimano is 12x1.5
Rock shox maxle is 12x1.75
Your bike manufacturer should be able to tell you which of these you need.
For reference here are the shaft lengths of all three options:
SRAM 142: 175mm
Shimano 142: 165mm
Shimano 148 Boost: 171mm
NZ delivery only.
HD3 Lower Link Assembly
Options for Non-Boost or Boost swingarms
Forged Aluminum
CNC machined
Anodized
Includes bearings
Super easy to replace
No special tools needed
NZ delivery only.
Ibis Mojo HD3 Upper Link Assembly
Forged Aluminum
CNC machined
Anodized
Includes bearings
Super easy to replace
No special tools needed
NZ delivery only.
4 mounting bolt kit for upper links.
Compatible With
Ripmo AF
Ripmo 1 - 2
Ripmo V2S
HD5
HD4
HD3
This is the set to install a lower link to a Mojo 3 or HD3 with boost 148 swingarm.
2 link shafts and 2 fixing bolts.
Torque to 24nm, Loctite 243 recommended.
NZ delivery only.
This is the set to install a lower link to a Mojo HD3 with original 142mm spacing swingarm.
2 link shafts and 2 fixing bolts.
Torque to 24nm, Loctite 243 is recommended.
NZ delivery only.
This is for the Lower / Rear eyelet that connects to the clevis.
15mm wide with an 8mm bore
Fits following models:
Alloy Frames
Exie
HD6, HD5, HD4
Mojo 3, Mojo 4
Ripley 4
Ripley V4S
Ripley V5
Ripmo 1-2
Ripmo V2S
Ripmo V3
Included in the 4 piece kit is an eyelet bushing, black-ano rod, and two plastic spacers.
NZ delivery only.
Replacement eyelet hardware from Fox.
This kit will allow you to refresh an existing shock or an aftermarket shock that doesn't come with the correct hardware to match the specs of our current models.
Fox part numbers for reference: Front 21.8mm wide: 803-03-165
Fits following models:
Mojo 3
HD4
HD5
Ripley 1 & 2
NZ delivery only.
Compatible With
Mojo 3
Mojo HD3
Mojo HD4
Polycarbonate
Protects Cables and Downtube from Rock Strikes
Lightweight
Mounts via 2 Under Downtube Bolts on Mojo HD3 or Mojo3 SM/MD frame, 4 bolts on LG/XL size frame. Bolts do not come with guard as they should be affixed to your bike frame.
Available in 2 sizes
NZ delivery only.
Compatible With
Mojo HD3
Mojo HD4
Mojo HD5
After an extended period of use, you might want to check these bushings for wear.
2x Igus Bushings
4x Reducer hardware (2x outer; 2x inner)
4x O-rings 18x1
2x Ti clevis to swingarm bolts
NZ delivery only.
Compatible With
Mojo HD4 - 5
Ripley 4
Ripley V4S
Ripmo 1 - 2
Ripmo V2S
Ripmo AF
This is the kit to replace the forward and rear shock mounting bolts. Contains
1 x Forward Aluminum bolt
1 x Rear Titanium bol
NZ delivery only.
If you want to mount a chain guide on your Ibis, you will need one of these.
When using SRAM DUB cranks along with the ISCG plate on a RipMo or any frame with a 73mm bottom bracket shell width, you will need the SRAM DUB 2mm spacer inside the drive side crank arm against the bottom bracket shell.
It's aluminum. ISCG 05 standard
NZ delivery only.